Inhaltszusammenfassung

Manufacturing chalcopyrite thin film solar cells from cost-efficient and environmentally friendly materials is of high priority. Therefore, the materials used in buffer layer production nowadays (such as indium and cadmium) need to be substituted. Zn(O,S) is considered to be a potential buffer layer material when deposited with a fast and inexpensive method. Zn(O,S) layers have been prepared by aerosol assisted chemical vapour deposition (AACVD) technique. AACVD technique is a simple non-vacu...Manufacturing chalcopyrite thin film solar cells from cost-efficient and environmentally friendly materials is of high priority. Therefore, the materials used in buffer layer production nowadays (such as indium and cadmium) need to be substituted. Zn(O,S) is considered to be a potential buffer layer material when deposited with a fast and inexpensive method. Zn(O,S) layers have been prepared by aerosol assisted chemical vapour deposition (AACVD) technique. AACVD technique is a simple non-vacuum process where the thin film deposition temperatures do not exceed 250 °C. 10 mM spray solution was made by dissolving zinc(II)acetylacetonate monohydrate in ethanol. The films were grown on Mo substrate at 225 °C (film growth temperature). The effect of deposition parameters (spray solution concentration, N2 flow rate, H2S flow rate) on Zn(O,S) thin film properties were studied with SEM and XRD. Thereupon optimising the deposition parameters, homogeneous and compact Zn(O,S) thin films were obtained and the films were employed in the chalcopyrite thin film solar cell structure by growing films on Cu(In,Ga)(S,Se)2 substrates industrially produced by BOSCH Solar CISTech GmbH. The resulting cells were studied using current–voltage and quantum efficiency analysis and compared with solar cell references that include In2S3 and CdS as buffer layer deposited by ion layer gas reaction and chemical bath deposition, respectively. The best output of the solar cell containing Zn(O,S) as buffer layer and without intrinsic ZnO under standard test conditions (AM 1.5G, 100 mW/cm2, 25 °C) is: Voc = 573 mV, Jsc = 39.2 mA/cm2, FF = 68.4% and efficiency of 15.4% being slightly better than the In2S3 or CdS containing solar cell references.» weiterlesen» einklappen

Autoren

Klassifikation

DFG Fachgebiet:
Physik der kondensierten Materie

DDC Sachgruppe:
Physik